#include <16F690.h>
#device adc=8
#include <flex_lcd.c>
#include "1wire.c"
#include "ds1820.c"
#FUSES NOWDT, INTRC, NOPUT, NOPROTECT, NOBROWNOUT, NOCPD, PUT, IESO,FCMEN
#use delay(clock=8MHZ)
#use rs232(baud=9600, parity=N, UART1, bits=8, stop=1)
//----------
void main(){
//----------
 float value = 0.0;
 set_tris_c(0b00000000);      // PORTC kimenet
 setup_adc_ports(NO_ANALOGS|VSS_VDD);
 setup_adc(ADC_OFF);
 setup_spi(SPI_SS_DISABLED);
 setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1);
 setup_timer_1(T1_DISABLED);
 setup_timer_2(T2_DISABLED,0,1);
 setup_oscillator(OSC_8MHZ);
 setup_uart(9600);
 delay_ms(1000);
 lcd_init();
 delay_ms(200);
 printf(lcd_putc,"\fteszt");
 delay_ms(1000);
 while(TRUE) {
// value = ds1820_read();
// printf(lcd_putc,"%f\t\n", value);
   } //while
}//main