void MXA_Test(void)
{
    a752:	cf 93       	push	r28
    a754:	df 93       	push	r29
	DEBUGGER_UART_TX_String("For Loop Start for(u8b i = 0; i < 4; i++)");
    a756:	89 eb       	ldi	r24, 0xB9	; 185
    a758:	94 e0       	ldi	r25, 0x04	; 4
    a75a:	0e 94 50 10 	call	0x20a0	; 0x20a0 <USART0_TX_String>
	DEBUGGER_UART_TX_String(enter_txt);
    a75e:	83 e1       	ldi	r24, 0x13	; 19
    a760:	93 e1       	ldi	r25, 0x13	; 19
    a762:	0e 94 50 10 	call	0x20a0	; 0x20a0 <USART0_TX_String>
	for(u8b i = 0; i < 6; i++)
    a766:	cc e8       	ldi	r28, 0x8C	; 140
    a768:	d0 e0       	ldi	r29, 0x00	; 0
	{
		//Print_Value_DEC("strmx[i]:	", i);
		DEBUGGER_UART_TXFS(esp8266_cmd_ptr[i].cmd_ptr);		
    a76a:	88 81       	ld	r24, Y
    a76c:	99 81       	ldd	r25, Y+1	; 0x01
    a76e:	0e 94 78 10 	call	0x20f0	; 0x20f0 <USART0_TX_Flash_String>
		DEBUGGER_UART_TX_String(enter_txt);
    a772:	83 e1       	ldi	r24, 0x13	; 19
    a774:	93 e1       	ldi	r25, 0x13	; 19
    a776:	0e 94 50 10 	call	0x20a0	; 0x20a0 <USART0_TX_String>
	for(u8b i = 0; i < 6; i++)
    a77a:	24 96       	adiw	r28, 0x04	; 4
    a77c:	80 e0       	ldi	r24, 0x00	; 0
    a77e:	c4 3a       	cpi	r28, 0xA4	; 164
    a780:	d8 07       	cpc	r29, r24
    a782:	99 f7       	brne	.-26     	; 0xa76a <MXA_Test+0x18>
		//esp8266_cmd_ptr[i].fp();
	}
	DEBUGGER_UART_TX_String("For Loop End");
    a784:	83 ee       	ldi	r24, 0xE3	; 227
    a786:	94 e0       	ldi	r25, 0x04	; 4
    a788:	0e 94 50 10 	call	0x20a0	; 0x20a0 <USART0_TX_String>
	DEBUGGER_UART_TX_String(enter_txt);
    a78c:	83 e1       	ldi	r24, 0x13	; 19
    a78e:	93 e1       	ldi	r25, 0x13	; 19
    a790:	0e 94 50 10 	call	0x20a0	; 0x20a0 <USART0_TX_String>