#include     __config (_INTRC_OSC_NOCLKOUT & _WDT_OFF & _PWRTE_OFF & _MCLRE_OFF & _CP_OFF & _BOR_OFF & _IESO_OFF & _FCMEN_OFF) 
cblock 0x20 endc             
org 0
Start:      
     bsf       STATUS,RP0          ; select Register Page 1      
     clrf      TRISC               ; A C portot kimenetre      
     movlw     0xFF      
     movwf     TRISA               ; Make PortA all input      
     bcf       STATUS,RP0          ; back to Register Page 0      
     bcf       STATUS,RP0     ; address Register Page 2      
     bsf       STATUS,RP1          
     movlw     0x0            ; I want all Port A pins digital      
     movwf     ANSEL      
     bcf       STATUS,RP0     ; address Register Page 0      
     bcf       STATUS,RP1 
Loop2:      
     movf      PORTA,w      
     movwf     PORTC      
     goto      Loop2 
end